Search For Posts
Classic Lear Jet Foundation has entered into our next major step in our restoration of 23-003 N200Y, the Non-Destructive Inspection (NDI)! NDI testing started on the forward fuselage of 23-003 on December 11, 2025. This will be a lengthy process that will continue into next year. It is a slow and steady work that uses X-ray photography to detect structural defects such as corrosion, cracks, etc. Because of the use of X-rays, we cannot be in the hangar so our restoration work has had to be paused when the NDI testing is in progress. The process starts with placing unexposed x-ray film on the fuselage at the desired inspection location. Then aiming the x-ray emitter on the opposite side of the structure. When the emitter is activated, x-rays pass through the structure and into the film. After the film is developed, the result is a ‘picture’ of the structure that shows any defect, corrosion, crack, etc. The structural visual inspections, using flashlights, mirrors and trained eyes, are also progressing, but slowly because of the NDI testing. It is amazing that we have entered the NDI phase on 23-003 in less than 2 years since our restoration started! On December 30, 2023, Jay Thomas removed the first Dzus fastener, officially kicking off the restoration of 23-003. Thanks to the dedicated volunteers who have put in nearly 2,000 hours of work to get us to this major phase on the road to fly N200Y again!
If you receive the RECHARGE newsletter, we assume you are already a valued supporter or donor to the Classic Lear Jet Foundation. We want to wish you a happy holiday season and we feel it appropriate to provide feedback on just what exactly your support has provided over the last year. Our mission is to restore the aircraft to an airworthy condition and return it to its 1964 original appearance. Due to its historical significance, we are looking much more in depth than a traditional aircraft inspection. Every part of this aircraft is being removed, inspected and cataloged for future repairs, restoration and reinstallation. Our electricians are fully documenting the electrical wiring in the aircraft, carefully identifying each individual wire and preparing to re-manufacture that wiring. With 147,000 inches (2.3 miles) and hundreds of engineering changes that’s a big job. We also spend a lot of time evaluating the necessary repairs and restoration of the aircraft structure and systems. We have made many field trips in search of aircraft structural and system components. Most of which are long obsolete, some of which we have found, some remain elusive, some we will have to fabricate. Another area of activity is seeking out donors for services, such as fabrication of replacement parts, (Maintenance, Repair and Overhaul) and necessary aircraft verification services. Behind the scenes, these hours are worked by a team of 7 individuals who donate their time every Tuesday and Thursday. As of this writing our volunteers have donated approximately 1900 aircraft labor hours with 1400 being logged since January 1.
With the removal of the windshields, glareshield and remaining instrument panel framework, we now have access to the foam insulation around the forward pressure bulkhead and the most forward fuselage. Ryan Timesch, owner of Best Engineered Performance Coatings (BEPC), and his daughter Raegan, came out on November 14 and 15, 2025 to finish their removal of foam beneath the cockpit floor and these now exposed areas in the forward fuselage. Following completion of the interior foam removal, the fuselage was moved to the north side of the hangar where it will be prepared for the Non-Destructive Inspections (NDI). It will be secured so that, after the NDI, any defective fuselage structure that is found can be repaired or replaced safely without allowing the fuselage to move or twist. The wing was moved to the south side of the hangar. Visitors, November 2025 Shane Johnson and family came out on Friday, November 15, 2025, to witness the dry ice blasting first hand. They were impressed at how easily and completely the dry ice removed the fuselage foam. They were able to see the before and after effects of the dry ice. The latest Flight Safety International (FSI) Model 45 training class visited 23-003 on November 6, 2025. Rick Rowe, CLJF Director of Public Relations, and Ron Forshee, CLJF Board member, provided the tour for the class and their instructors Abe Vidulich and Phil Heseltine.
We continue to work toward preparing 23-003 for the Non-Destructive Inspection (NDI) phase of her restoration. The cabin windows were removed on October 8, 2025. As of October 9, 2025, we are moving forward with the preparation efforts for the removal of the windshields. Lee Aerospace will do the actual removals in order to accurately manufacture duplicate windshields to fit into the existing structural framework and fastener hole pattern. Lee Aerospace will also manufacture new cabin windows for 23-003 N200Y! We are going through the wiring from each connector in the wiring bundle, that was previously removed from 23-003, comparing each wire to the production wiring diagrams to identify the purpose of each wire. This information will be used when we build the new wiring harness to ensure that it accurately covers all of the needs of 23-003. The tip tanks were taken to the K&L Body Shop by owner Larry Ortiz to have the last remnants of paint and aerodynamic filler (Bondo) removed on October 21, 2025. Thank You Larry Ortiz and the K&L Body Shop for coming forward to help with the restoration!
A major step in the restoration of 23-003 N200Y was achieved on September 9, 2025 when it returned from having the paint stripped from the fuselage, tip tanks and horizontal stabilizer. As you can see in the photos, we will have to manually remove the remaining bits of paint (download the full newsletter to view photos). The next step is to complete some additional dry ice blasting and remove the windshield and windows then start the Non-Destructive Inspections (NDI) of the fuselage structure. This will identify any structural components, skin, frames, etc. that will require repair or replacement. The crew that stripped the paint paused in front of the fuselage of 23-003 just before it was loaded onto a Patton Trucking trailer for the trip back to building 14. They are (not in order in the photo): Dave Lewis, Kevin Dome, Harold Haviland, Will Brown, Joseph Irwin, Adam Biggs and Jay Prideaux (not pictured). A big THANK YOU to the anonymous vendor that donated his company’s time and resources to strip the paint! Also, THANK YOU to Patton Trucking for donating their equipment and personnel to take 23-003 to the paint stripping facility and bring her home again.
The final sealing of the fuselage, tip tanks and horizontal stabilizer has been completed and they were prepared to be shipped off to have their external paint removed. All openings, seams, windshield and windows had aluminum tape or sealer applied to keep the chemical stripper out of the inside. The tip tanks and horizontal stabilizer were loaded onto a trailer on August 5, 2025 and taken to a paint facility for paint stripping using Al Goodwin’s truck and a trailer borrowed by Dave Dendurant. The tip tank cradles were the same ones that were used for their trip from Florida. The fuselage was lifted off of its jacks and placed in its cradle on a trailer for its trip to have the paint stripped on August 12, 2025. The truck and trailer, as well as the trip to the paint facility, were donated by Patton Trucking of Clearwater, Kansas. These parts should be back in building 14 in early September and ready to have the remaining bits of paint removed. Then we will remove the windshields, windows, panels, finish the internal foam removal and start the Non-Destructive Inspection (NDI). Any issues found on the skins, stringers, etc., such as corrosion, will be repaired or replaced. While these parts are out to be stripped, we are currently setting up to do a pressure check of the right hand wing looking for any leaks. These results, along with the corrosion found on the left wing, will help us make a decision about the wing. Whether it is repairable or we must replace it. Cross your fingers! We just passed 1,400 volunteer hours since 23-003 arrived in Wichita! Thank you to all of you who have contributed your time to help restore 23-003!
